google ads

Hewlett Packard ProLiant DL380 G7 (DDR3-1066MHz) Memory

Maximum Memory 384GB(Quad-Rank)/288GB(Dual-Rank) (Registered ECC)/48GB (ECC)
Memory Slots 18 Sockets (9 Sockets (3 banks of 3) per CPU) (Registered ECC)/12 Sockets (6 Sockets (2 banks of 3) per CPU) (ECC)/(Quad-Rank RDIMM)
non-removable base memory 0MB
Machine name: Hewlett Packard ProLiant DL380 G7
CPU options: Intel Xeon 5600 Processor
Chipset: Intel 5520 Chipset
HD Bus: SATA15035/SATA15025
Front Side Bus options:
Memory Speed options: PC3-8500 DDR3-1066 240pin Registered ECC/Unbuffered ECC SDRAM DIMM
Special notes:
- Mfgr's System p/n's: 470065-358; 470065-361; 470065-362; 470065-368; 470065-375; 470065-480; 583914-B21; 583966-001; 583966-421; 583967-001; 583967-421; 583968-001; 583968-421; 583970-001; 583970-421; 587493-L21; 589150-001; 589150-421; 589152-001; 589152-421; 605029-425; 605030-425; 605878-005; 633405-421; 633407-421; 633408-421; 639829-005.

- Due to chipset limitations, DDR3 Quad Rank memory will operate at 1066MHz in the first Triple Channel bank. Adding Quad Rank modules in the second Triple Channel bank will operate at 800MHz. The third memory bank must be unpopulated. Due to chipset limitations, Unbuffered ECC DIMMs are limited to TWO Triple Channel Banks per processor on Intel Xeon 55xx series systems. This system supports either Registered ECC or Unbuffered ECC memory. Mixing Registered ECC and Unbuffered ECC modules is not supported within this system.

- Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors. Some systems support Low Voltage and standard voltage DIMMs but do not allow mixing DIMM voltage; all DIMMs must be the same voltage. Check system documentation for mixing DIMM voltage.

- Use like modules for dual and triple channel operation. For optimum dual or triple channel configurations, use like modules within the same memory bank. Do not mix single, dual or quad rank modules, varying capacities or speeds.

Search By Letter: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z